
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX160-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X160-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 160mm nominal stroke that can be dialed back by up to 50mm, creating a 110-160mm usable travel window for precise end-position tuning.
This variant uses a SUS420J2 stainless steel rod for corrosion resistance and PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, though this unit lacks the -S magnet for CMSE or DMSE switches. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX160-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 110-160mm travel window during line changeovers without physically replacing the cylinder or adding external stopper blocks.
Fine-tune the retract end-position at commissioning using the rear screw, perfect for dialing in precise clamping or ejection depths.
Easily adjust the effective stroke to accommodate new tooling heights or sensor targets during initial machine build and integration.
If your process needs less force, stepping down is not an option within the SAIJ range, but stepping up to a 40mm bore yields 628N. The 50mm adjustment range is perfect for product changeovers, allowing you to shorten the stroke without swapping the cylinder or adding external stops.
For replacement, match the 32mm bore, 160mm stroke, 50mm adjustment, PT port thread, and SUS420J2 rod material. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding, consider an external rod lock or the SAIL series. Since the stroke is under 300mm, side-load concerns are minimal, but always guide long unsupported loads.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke by up to 50mm. This creates a 110-160mm usable travel window, allowing fine-tuning of the end position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.