
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX160-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X160-75-S is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster, designed for applications requiring exact end-position tuning. It provides a usable travel window of 85-160mm, letting you dial back the 160mm nominal stroke by up to 75mm during commissioning without adding external stops.
This variant features a SUS420J2 stainless steel piston rod (option A) for improved corrosion resistance compared to standard carbon steel. The barrel is an extruded aluminum profile with sensor grooves on both sides, and because this model includes a magnet (-S), it supports AirTAC CMSE reed and DMSE electronic solid-state switches for precise position feedback. It uses PT tapered ports sized G1/8 and offers variable air cushioning at both ends to decelerate the load smoothly.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX160-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 85-160mm travel window during product size changeovers without swapping out the entire cylinder or adding external mechanical stops.
Leverage the integrated magnet with DMSE electronic sensors to verify the adjusted end-of-stroke position in automated test and measurement fixtures.
The rear adjuster acts strictly as a mechanical stop to set the travel end; it does not hold the load without live air pressure. For load-holding requirements without continuous pressure, consider an external pilot-operated check valve or related AirTAC series like SAIL or BSAI. To match this ISO 15552 footprint exactly, specify the 32mm bore, 160mm stroke, 75mm adjustment, PT G1/8 port, and the -S magnet option. Since the stroke is under 300mm, side-load stress on the 12mm rod is moderate, but external guides are still recommended for heavy lateral loads. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR.
Quick checklist
The rear adjusting screw acts as a stopper that lets you shorten the effective stroke from the nominal 160mm down to 85mm. This creates an 85-160mm adjustable travel window for fine-tuning at commissioning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.