
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX165-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X165-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to dial back the nominal 165 mm travel to a precise window of 65-165 mm. This wide 100 mm adjustment range is ideal for prototyping and product changeovers, letting you set variable end stops on the fly without swapping the physical cylinder.
Unlike a fixed-stroke SAI, this model lets you fine-tune the retract end position at commissioning rather than adding external mechanical stops. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches. The rear adjuster acts purely as a travel stop to set deceleration, so it will not hold a load safely without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position between 65 and 165 mm during product line changeovers without disassembling the actuator setup.
Set precise end-of-stroke limits for delicate pressing or indexing tasks where the effective travel distance varies per run.
Adjust the rear stopper screw to perfect the end position during initial machine commissioning, avoiding external stop blocks.
Choose this 32 mm bore when your application requires a nominal 165 mm stroke but demands a wide 65-165 mm adjustable window for frequent product size changes. For load-holding without continuous air pressure, this standard adjuster is not a lock, so consider the SAIL or BSAI series instead.
This SKU is dimensionally interchangeable per ISO 15552 and features a PT tapered port, SUS420J2 rod material, and no magnet. It supports the reduced SAIJ mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Quick checklist
It features a rear stopper screw that lets you mechanically shorten the effective travel from the nominal 165 mm down to as little as 65 mm, providing a 100 mm adjustment window for variable end stops.
At 0.7 MPa, the push force increases to 563 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.