
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX165-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X165-100-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the nominal 165 mm travel back by up to 100 mm. This creates a highly flexible 65-165 mm usable positioning window, letting you dial in the exact end-stop during commissioning without swapping hardware.
Equipped with a magnet for position sensing, this unit works seamlessly with AirTAC CMSE reed and DMSE electronic switches. The piston rod is built from SUS420J2 stainless steel for improved corrosion resistance, and the extruded aluminum barrel includes sensor grooves on both sides. The rear screw acts purely as a travel stop for deceleration, so it will not hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the 65-165 mm stroke window on packaging lines to accommodate varying carton sizes without changing the cylinder.
Use the rear adjuster to safely vary the retraction point on assembly fixtures, relying on the stop rather than adding external hardware.
The massive 100 mm adjustment range is perfect for prototyping or production lines handling frequent product-size changeovers, eliminating the need to bolt on external stops. For any load-holding requirements without continuous air pressure, this cylinder is insufficient as the adjuster is not a lock, so you should look at an external rod lock or the SAIL series.
To match this ISO 15552 dimensionally interchangeable cylinder for a replacement, verify the 32 mm bore, 165 mm nominal stroke, 100 mm adjuster, PT port thread, and the -S magnet option. Mounting choices are limited to the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since the stroke is under 300 mm, side-load stress on the 12 mm rod is manageable, but external guides remain recommended for heavy lateral loads.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw allows you to shorten the 165 mm nominal stroke by up to 100 mm, providing a usable travel window of 65 to 165 mm. The adjuster acts as a mechanical stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.