verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-10S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX165-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke165 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$87.90 $95.40Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-10S

The AirTAC SAIJ32X165-10-S is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster. It provides a 155-165 mm usable travel window, letting you fine-tune the retract end-position without swapping the unit.

This model includes a magnet for CMSE reed and DMSE electronic sensors, plus a SUS420J2 stainless steel rod for corrosion resistance. The SAIJ mounting set omits FB, CA, CB, and CR options, offering Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-10S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32AX165-10S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke165 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-10S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×165Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-10S Is Used

tune

Variable End-Stop Tuning

Dial in the exact 155 to 165 mm retract position during machine commissioning without adding external stops.

settings_input_component

Product Size Changeover

Quickly adapt the stroke window on packaging lines when switching to a slightly different product length.

precision_manufacturing

Sensor-Ready Positioning

Leverage the -S magnet with DMSE electronic sensors to confirm the adjusted end-of-travel position.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-10S the Right Cylinder?

The 10 mm rear adjuster is ideal for commissioning fine-tuning and product changeover, acting as a travel stop rather than a load lock. For holding loads without live air, use a SAIL or BSAI cylinder.

When replacing an ISO 15552 cylinder, match the 32 mm bore, 165 mm stroke, 10 mm adjustment, PT ports, and -S magnet. The 12 mm rod and M10x1.25 thread handle moderate side loads, but the 165 mm stroke still requires an external guide for heavy loads.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-10S FAQ

The operating speed range is 30-800 mm/s.

A rear screw stopper lets you shorten the 165 mm nominal stroke by up to 10 mm, creating a 155-165 mm travel window. It acts as a physical stop and does not lock the load without air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32AX165-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.