
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX165-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X165-20 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the end-of-travel position without adding external stops. Based on a 165 mm nominal stroke and a 20 mm adjustment code, it provides a usable travel window of 145 to 165 mm.
This variant features a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance compared to standard carbon steel. It uses PT tapered port threads (G1/8) and lacks a standard magnet, meaning position sensing via CMSE or DMSE switches is not supported unless specified otherwise. The extruded aluminum barrel includes sensor grooves on both sides, and the variable air cushions at both ends work alongside the rear stopper to decelerate the load smoothly.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 145-165 mm travel window during format changes on packaging lines without replacing the cylinder or adding external stopper blocks.
Fine-tune the retract end position during commissioning to perfectly seat delicate components using the 20 mm rear adjustment screw.
The adjustable stroke is ideal for machine setups requiring frequent product changeovers, as the 20 mm rear screw allows rapid end-position tuning without swapping the cylinder. Remember that the rear adjuster acts only as a travel stop, not a lock, so the SAIJ cannot hold a load without live air pressure.
For an exact ISO 15552 replacement, match the 32 mm bore, 165 mm stroke, 20 mm adjustment, PT port thread, and the specific mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Since the 165 mm stroke is relatively short, side-loading is less of a concern than with longer strokes, but ensuring proper alignment remains critical for seal longevity.
Quick checklist
At 0.5 MPa, the push force is 402 N.
The rear adjusting screw acts as a mechanical stopper that lets you shorten the effective stroke by up to 20 mm, creating a usable travel window of 145 to 165 mm. It is a travel stop only and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.