
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX165-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X165-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 165 mm stroke that can be fine-tuned backward by up to 20 mm, creating a precise 145-165 mm usable travel window.
This variant features a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and includes a magnet (-S) for use with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel incorporates sensor grooves on both sides, and the PT tapered port ensures a tight pneumatic seal for the 30-800 mm/s operating speed range.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 145-165 mm travel window during product size changeovers without replacing the cylinder or altering mountings.
Fine-tune the retract position during initial commissioning to prevent mechanical crashes and optimize the tooling contact point.
Provides adjustable physical stops for delicate component placement tasks where a fixed 165 mm stroke might over-travel.
Choose this 32 mm bore when an application requires exact end-position tuning at commissioning without the need to physically swap cylinders or bolt on external stops. Because the stroke is 165 mm, side-load stress is moderate, but ensuring proper external guiding is still recommended for optimal seal life.
The rear adjuster acts strictly as a mechanical stop to set the travel end and relies on the variable air cushion for deceleration; it does not hold the load without live air pressure. For applications requiring true load-holding in the event of pressure loss, consider the SAIL or BSAI series. To match this ISO 15552 replacement exactly, confirm the 165 mm stroke, 20 mm adjustment, PT port, SUS420J2 rod, and -S magnet configuration.
Quick checklist
The rear adjusting screw acts as an external stopper that allows you to shorten the effective stroke by up to 20 mm. This creates a usable travel window of 145-165 mm, enabling fine-tuning of the end position at commissioning without changing the cylinder.
At a maximum 1.0 MPa pressure, it can output up to 82 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.