verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-30S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX165-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke165 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$87.90 $95.40Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-30S

The AirTAC SAIJ32X165-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 165 mm stroke that can be fine-tuned down by up to 30 mm, yielding a usable travel window of 135 to 165 mm.

This variant features a SUS420J2 stainless steel rod (material code A) for improved corrosion resistance and ships with a magnet (-S) for use with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel includes sensor grooves on both sides, and fluid control is managed through a PT tapered G1/8 port.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-30S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32AX165-30S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke165 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-30S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×165Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-30S Is Used

tune

Machine Changeover

Dial in the 135-165 mm travel window during product size changes without replacing the cylinder or adding external stopper blocks.

precision_manufacturing

End-Position Tuning

Fine-tune the retract end-position at commissioning to perfect part seating or clamping depth using the rear adjustment screw.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-30S the Right Cylinder?

Select this adjustable-stroke model when your assembly requires precise end-position tuning during commissioning or product changeover, avoiding the need to physically swap cylinders or bolt on external stops. The rear adjuster acts strictly as a travel stop and does not hold the load without live air—for fail-safe load holding, consider an external rod lock or the SAIL/BSAI series.

To match this ISO 15552 interchangeable cylinder for a replacement, verify the 32 mm bore, 165 mm nominal stroke, 30 mm adjustment range, PT port thread, and the -S magnet option. Mounting choices are limited to the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Since the 165 mm stroke is moderate, standard rod side-load limits apply, but ensure proper alignment to maximize seal life.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-30S FAQ

The rear adjuster screw allows you to shorten the effective stroke by up to 30 mm. This creates a usable travel window of 135 to 165 mm, letting you set the exact retract end-position without changing the cylinder's physical mounting.

At 0.7 MPa, the push force increases to 563 N. The maximum thrust is 82 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32AX165-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.