
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX165-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X165-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end position. With a nominal 165 mm stroke and a 40 mm adjustment range, it provides a usable travel window of 125 to 165 mm.
This specific SKU ships with a SUS420J2 stainless steel rod for superior corrosion resistance and includes a piston magnet (-S) for compatibility with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel features sensor grooves on both sides for flexible switch mounting, and the PT tapered port threads ensure a tight, reliable pneumatic connection.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop from 125 to 165 mm when switching a packaging line between different product sizes, eliminating the need for physical spacer blocks.
Fine-tune the retraction point during initial commissioning to ensure precise placement of components without remounting the cylinder.
Choose this 32 mm bore adjustable-stroke cylinder when your application requires precise end-position tuning during commissioning or product changeovers without swapping out the entire unit. Conversely, if you need less force and a smaller footprint, dropping to a 25 mm bore might suffice, though the 32 mm bore offers a robust balance for general automation.
This unit uses a PT port thread (G1/8) and supports a mounting set limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the 165 mm stroke is under 300 mm, side-load concerns are minimal, but always ensure the load is guided. Remember that the rear adjuster is a travel stop, not a lock; the SAIJ32X165-40-S will not hold its position without live air pressure. For true load-holding, consider the SAIL or BSAI series.
Quick checklist
It can reach a maximum thrust of 82 kgf at 1.0 MPa.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from its nominal 165 mm down to as little as 125 mm. This creates a 40 mm adjustable window for fine-tuning the end position without changing the cylinder's physical mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.