
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX165-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X165-50 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 165 mm stroke that can be dialed back by up to 50 mm, yielding a precise 115-165 mm usable travel window.
This variant features a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and uses PT tapered port threads with a G1/8 connection. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to easily mount CMSE reed or DMSE electronic switches if position feedback is needed later.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 115-165 mm travel window during format changes on packaging lines without replacing the cylinder or adding external mechanical stops.
Fine-tune the retract stroke precisely during machine commissioning to accommodate sensor spacing or delicate part contact.
The 50 mm adjustment range is ideal for product changeovers, letting you fine-tune the retract distance at commissioning without swapping hardware or adding external stops. If your application requires less force, stepping down is an option, but for higher loads, consider a 40 mm bore providing 628 N.
Because the 165 mm stroke is below the 300 mm threshold, side-load stress is minimal, though the 12 mm rod still requires linear guidance for heavy lateral loads. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for fail-safe locking, explore the SAIL or BSAI series. This model supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
The rear adjuster acts as a mechanical stop that shortens the effective stroke. For this SAIJ32X165-50 model, you can trim the nominal 165 mm stroke back by up to 50 mm, creating a usable travel window of 115 to 165 mm.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.