verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-75S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX165-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke165 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$87.90 $95.40Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-75S

The AirTAC SAIJ32X165-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This wide trim capacity allows operators to dial in exact retract end positions during machine setup without swapping out the physical cylinder.

Built for harsher environments, this variant incorporates a SUS420J2 stainless steel piston rod and PT tapered ports. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated magnet (-S) is fully compatible with AirTAC CMSE reed and DMSE electronic switches for precise position feedback.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-75S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32AX165-75S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke165 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-75S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×165Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-75S Is Used

tune

Machine Changeovers

Quickly reconfigure the retract end position for different product sizes on a single conveyor line without disassembling the cylinder.

settings_input_component

Prototype Fixtures

Dial in the exact 90-165mm travel distance during initial commissioning to find the optimal end-of-stroke position for new tooling.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-75S the Right Cylinder?

If your process needs less force, dropping to a 20mm bore yields 201N; stepping up to a 40mm bore provides 628N. The 75mm adjustment window is excellent for prototyping or varying part sizes on a single line. For load-holding without live air pressure, note that this rear adjuster acts only as a travel stop, so you must use a SAIL pneumatic lock or an external rod lock.

When replacing an ISO 15552 cylinder, match the 32mm bore, 165mm nominal stroke, PT port threads, and the -S magnet requirement. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. Because the 165mm stroke is under 300mm, side-load stress on the 12mm rod is minimal, though external guides are still recommended for heavy lateral loads.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-75S FAQ

At 0.7MPa, the push force increases to 563N.

The rear adjusting screw acts as a mechanical stopper that shortens the effective stroke. For this SAIJ32X165-75-S model, the 75mm adjustment range allows you to trim the nominal 165mm stroke down to any usable travel distance between 90mm and 165mm.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX165-75S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32AX165-75S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.