
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX170-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X170-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 70 to 170 mm, allowing you to dial back the nominal 170 mm stroke by up to 100 mm during commissioning.
This model omits the FB, CA, CB, and CR mountings, utilizing a reduced ISO 15552 mounting set comprising Basic, FA, LB, TC, FTC, TCM1, and TCM2. The rear adjuster acts purely as a mechanical stop to fine-tune the end position and does not hold the load without live air pressure. For position holding without continuous air, an external rod lock or a related SAIL pneumatic lock cylinder is required.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX170-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the travel distance from 70 to 170 mm on packaging lines handling varying container sizes without changing the actuator hardware.
Fine-tune the retract end-position during initial commissioning to achieve precise mechanical alignment without adding bulky external stopper blocks.
If your application requires less force, stepping down is not an option in this size range, but stepping up to a 40 mm bore provides 628 N. The massive 100 mm adjustment window on this 170 mm stroke is perfect for machines running multiple product sizes, eliminating the need to physically swap cylinders for shorter travel requirements.
Because this cylinder lacks a magnet for sensors, position detection must be handled externally if needed. The 12 mm carbon-steel-equivalent stainless rod handles standard loads well, but at 170 mm stroke, ensure your mounting configuration resists side-load deflection. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders without relying on tie-rod construction.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjusting screw acts as a mechanical stop, allowing you to shorten the effective travel from the nominal 170 mm down to as little as 70 mm. It only sets the end position and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.