
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX170-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X170-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end position during commissioning. Based on a 170 mm nominal stroke, the external stopper screw provides a 150-170 mm usable travel window, letting you dial back the stroke by up to 20 mm without adding external stops or swapping the cylinder.
In this configuration, the piston rod is SUS420J2 stainless steel (code A) and the fluid ports are PT tapered thread. The 32 mm bore generates 402 N of pull force at 0.5 MPa, while the extruded aluminum barrel includes sensor grooves on both sides. It is important to note the rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX170-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 150-170 mm travel window during product-size changeovers to set new end positions rapidly without physically swapping cylinders.
Fine-tune the retract end-stop during machine commissioning to absorb mechanical tolerances and achieve precise positioning.
Adjust the stroke on packaging lines to handle different carton sizes, using the rear stopper to set the exact retract distance.
Choose this 32 mm bore adjustable cylinder when your setup requires precise end-position tuning on the fly, such as during product-size changeovers on a conveyor line. If your application needs greater thrust, stepping up to the 40 mm bore yields 528 N of pull force at 0.5 MPa. Conversely, if you only need a fixed end position, the standard SAI cylinder is a simpler alternative.
To match this exact configuration for an ISO 15552 replacement, specify a 32 mm bore, 170 mm stroke with a 20 mm adjustment range, PT tapered ports, SUS420J2 rod material, and no magnet. Since this unit lacks a -S magnet, position sensing via CMSE reed or DMSE electronic switches is not supported. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw lets you shorten the effective travel from the 170 mm nominal stroke down to 150 mm. This creates a 150-170 mm usable window for fine-tuning the retract position at commissioning, but it functions only as a stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.