
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX170-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
Its external rear stopper lets you dial back the 170mm nominal stroke by up to 20mm, creating a 150-170mm usable travel window for precise end-position tuning. This configuration includes a SUS420J2 stainless steel rod (option A) for enhanced corrosion resistance and a built-in magnet for position sensing.
Unlike a fixed-stroke SAI, this adjustable model eliminates the need to swap cylinders or bolt on external stops during commissioning. The extruded aluminum barrel features sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic solid-state switches. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX170-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the 150-170mm retract end-stop during product size changeovers on a packaging line without swapping hardware.
Dial in the exact retraction position during machine commissioning, absorbing mechanical tolerance buildup using the rear adjuster.
Adjust the effective stroke on automated test fixtures to accommodate different part heights without adding external physical stops.
The PT tapered port threads match standard pneumatic fittings, and the M10x1.25 rod thread handles moderate side loads, though long unsupported strokes still need an external guide. To replace an ISO 15552 cylinder, match the 32mm bore, 170mm stroke, 20mm adjustment, PT port, and -S magnet.
For machine changeovers or varying product sizes, the 20mm adjustment window allows operators to fine-tune the retract position on the fly. If your process requires the cylinder to hold its position without continuous air pressure, note that this adjuster is a stop, not a lock; you should look at an SAIL or BSAI series cylinder instead. The mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
Quick checklist
At 0.7 MPa, the push force increases to 563N.
The rear adjuster screw lets you shorten the 170mm nominal stroke by up to 20mm, providing a usable travel window of 150-170mm. This stopper fine-tunes the end position but does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.