
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX170-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X170-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 170 mm stroke that can be dialed back by up to 30 mm, creating a precise 140-170 mm usable travel window for commissioning without adding external stops.
This variant features an SUS420J2 stainless steel piston rod (code A) for improved corrosion resistance compared to standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides, and because this unit includes a magnet (-S), it directly supports AirTAC CMSE reed and DMSE solid-state switches for precise position feedback. Fluid supply is via PT tapered G1/8 ports.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX170-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 140-170 mm end-stop during initial commissioning to perfect a pushing or clamping operation without machining custom spacers.
Quickly shorten the effective stroke by up to 30 mm on a packaging line when switching to a slightly smaller product format.
Leverage the integrated magnet with DMSE electronic sensors to confirm the adjusted end position in automated assembly fixtures.
Choose this 32 mm bore adjustable cylinder when your application requires exact end-position tuning during setup or product changeover, rather than relying on a fixed-stroke SAI model. If you need greater thrust, stepping up to the 40 mm bore raises the 0.5 MPa push force to 628 N. The rear adjuster acts strictly as a mechanical stop to set the travel end and relies on the integrated air cushion for deceleration; it does not lock or hold the load without live air pressure. For load-holding requirements, consider an SAIL or BSAI cylinder instead.
To replace an ISO 15552 cylinder, match the 32 mm bore, 170 mm stroke, 30 mm adjustment range, PT G1/8 port, and the -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR styles found on other variants. Operating speed ranges from 30-800 mm/s.
Quick checklist
If you increase the pressure to 0.7 MPa, the push force rises to 563 N.
A rear external stopper screw lets you trim the effective travel back by up to 30 mm from the 170 mm nominal stroke, giving a 140-170 mm adjustable window. This stopper sets the travel end and decelerates the load via the air cushion, but it does not function as a lock and requires live air to hold position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.