
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX170-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X170-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 130-170 mm usable travel window from its 170 mm nominal stroke.
This unit features an SUS420J2 stainless steel rod for enhanced corrosion resistance. The rear adjustment screw acts purely as a mechanical stop to fine-tune the end position at commissioning without adding external stops; it does not hold the load without live air pressure. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX170-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 130 to 170 mm during product size changes without swapping the cylinder.
Fine-tune the final retract position at commissioning using the rear adjuster, avoiding the need for external mechanical stops.
If your setup needs less force, stepping down is an option, but if you require significantly higher thrust, a 40 mm bore provides 879 N at 0.7 MPa. The 40 mm adjustment range is ideal for product changeovers where the exact retract distance varies.
Because this is a standard double-acting cylinder, the adjuster and air cushions only decelerate the travel end—they do not function as a lock. For load-holding without live pressure, consider the SAIL or BSAI series. To replace an ISO 15552 cylinder, match the 170 mm stroke, 40 mm adjust code, PT G1/8 port, and desired mounting interface. The 170 mm stroke is well within safe side-load limits, though long unsupported strokes should always use an external guide.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 40 mm, providing a usable travel window of 130 to 170 mm. The adjuster acts as a travel stop and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.