
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX170-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X170-50-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. Because this is a -50S configuration, you can dial the 170mm nominal stroke back by up to 50mm, creating a 120-170mm usable travel window for exact positioning without swapping hardware.
This unit includes a magnet for CMSE reed and DMSE electronic sensors, utilizing the dual-side sensor grooves on its extruded aluminum barrel. The rod is constructed from SUS420J2 stainless steel for enhanced corrosion resistance, and the rear adjuster functions purely as a travel stop to fine-tune end positions at commissioning.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX170-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 120-170mm travel window during product size transitions without replacing the cylinder or adding external mechanical stops.
Use the 50mm rear adjuster to fine-tune the retract stroke precisely at commissioning, ensuring exact placement of 32mm bore tooling.
Quickly modify the effective stroke on automated test fixtures, leveraging the SUS420J2 stainless rod and CMSE/DMSE sensor compatibility.
Choose this 32mm bore when your application requires a 345N pull force at 0.5 MPa and variable end-stops. If you need less force, stepping down to a 25mm bore offers lighter dynamics, while stepping up to a 40mm bore yields 528N of pull force. The adjustable stroke is ideal for product changeovers on a line, allowing you to shift the end-position by up to 50mm without bolting on external stops or buying a fixed-stroke SAI cylinder.
When specifying a replacement, verify the 170mm stroke, 50mm adjustment range, PT tapered port thread, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets. Since the 170mm stroke is below the 300mm threshold, side-load concerns are minimal, but always guide unsupported loads. Note that the rear adjuster is a stop, not a lock; for load-holding without live air, consider an AirTAC SAIL or BSAI cylinder.
Quick checklist
The 170mm nominal stroke can be adjusted back by up to 50mm, giving an effective usable travel window of 120-170mm.
No, the rear adjuster acts only as a travel stop to set the end position, and the air cushions only decelerate the motion. Neither holds the load without live air pressure; for true load-holding, use an external rod lock or an AirTAC SAIL/BSAI cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.