
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX170-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X170-75-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed and DMSE electronic switches.
This unit is configured with a SUS420J2 stainless steel rod (code A) for enhanced durability against moisture and a PT tapered port thread. The rear adjustment screw functions strictly as a mechanical stop to set the retract end-position; it does not lock the load. For applications requiring position holding without live air pressure, consider the SAIL or BSAI series instead.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX170-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract position precisely within the 95-170mm window to accommodate changing material thicknesses on a packaging line.
Quickly adjust the effective stroke during product family changeovers without disassembling the cylinder or adding mechanical shims.
The 75mm adjustment range is ideal for machines processing varying product sizes, letting operators dial in the exact retract distance without adding external stops or swapping cylinders. If your process requires the rod to hold its position during an air loss event, note that this standard SAIJ adjuster only decelerates travel—you would need an external pilot-operated check valve or the SAIL lock series.
When replacing an ISO 15552 cylinder, match the 32mm bore, 170mm stroke, PT port thread, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting interface. The 12mm rod and M10x1.25 thread handle moderate side loads, but at 170mm of travel, ensure your payload is guided externally to prevent binding. The -S magnet option ensures compatibility with AirTAC CMSE and DMSE sensors.
Quick checklist
The rear adjuster allows you to shorten the effective stroke by up to 75 mm, creating a usable travel window of 95-170 mm. It acts as a mechanical stop to fine-tune the end position at commissioning; it does not lock the load in place without live air pressure.
The standard speed range for this 32mm bore is 30-800 mm/s, supported by a 27mm cushion at both ends.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.