
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX175-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X175-10 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 165-175 mm usable travel window, allowing you to trim the effective stroke by up to 10 mm during commissioning without swapping the cylinder or adding external stops.
This variant features a SUS420J2 stainless steel rod (code A) for enhanced durability against moisture and a PT tapered port thread. The extruded aluminum barrel includes sensor grooves on both sides, and while this specific SKU lacks a magnet, the design supports AirTAC CMSE reed and DMSE electronic sensors when a magnet is specified. The rear adjuster acts purely as a travel stop and does not hold the load without live air.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 165-175 mm travel window during product size changes to perfectly align stops without replacing hardware.
Fine-tune the retract end position at commissioning to resolve mechanical tolerances in assembly tooling.
Adjust the stroke on the fly for diverter gates handling different package sizes on a packaging line.
The adjustable stroke is ideal for machine setups requiring variable end stops or product changeovers, contrasting with a fixed-stroke SAI cylinder. For load-holding without live air pressure, consider the SAIL or BSAI series, as the SAIJ adjuster is not a lock. When replacing an ISO 15552 cylinder, verify the 32 mm bore, 175 mm stroke, 10 mm adjustment, PT port, and mounting style.
With a 175 mm stroke, the 12 mm rod and M10x1.25 rod thread provide a robust interface, but always ensure adequate external guiding for the load to prevent excessive side-loading on the rod. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
Quick checklist
The rear adjuster screw allows you to shorten the 175 mm nominal stroke by up to 10 mm, creating a 165-175 mm usable travel window. It functions as a mechanical stop to fine-tune the retract position and is not a locking device.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.