
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX175-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X175-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 75-175 mm from its 175 mm nominal stroke. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated magnet (-S) enables precise position detection using AirTAC CMSE reed or DMSE electronic solid-state switches.
This 32 mm bore model uses a G1/8 (PT tapered) port and relies on variable air cushions at both ends to decelerate the motion. The rear adjuster acts strictly as a mechanical stop to fine-tune the end position without adding external stops; it does not hold the load without live air pressure. For applications requiring true load-holding, consider the SAIL or BSAI series instead.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retraction point between 75 and 175 mm during commissioning without swapping out the physical cylinder or adding external mechanical stops.
Quickly adapt machine stroke length on packaging or assembly lines when handling different product sizes, leveraging the 100 mm adjustment window.
Utilize the integrated magnet with DMSE electronic sensors to verify position within the adjustable travel range during lab or automated testing routines.
The 100 mm adjustment range is ideal for machine setups that undergo frequent product changeovers, allowing you to dial back the stroke from 175 mm down to 75 mm on the fly.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 175 mm stroke, 100 mm adjustment, PT G1/8 port, and the -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets. Because the stroke is under 300 mm, the 12 mm rod handles normal side loads well, though an external guide is always recommended for heavy offset loads.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it can deliver up to 80 kgf.
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke from the 175 mm nominal length down to as little as 75 mm. It is a travel stop, not a lock, so it will not hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.