verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-20

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX175-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke175 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$85.11 $92.61Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-20

The AirTAC SAIJ32X175-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window down to 155-175 mm from the 175 mm nominal stroke. The extruded aluminum barrel includes sensor grooves on both sides for straightforward detection integration.

This specific configuration includes a SUS420J2 stainless steel rod (code A) for enhanced corrosion resistance and utilizes PT tapered port threads. The rear adjuster acts purely as a mechanical stop to dial in the end position during commissioning; it is not a locking mechanism and will not hold the load without live air pressure. For load-holding applications without continuous air supply, consider the SAIL or BSAI series.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-20 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32AX175-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke175 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-20

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×175Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-20 Is Used

tune

Machine Changeover

Dial in the 155-175 mm travel window during product size transitions to perfectly position components without swapping the entire cylinder.

precision_manufacturing

End-Position Tuning

Use the rear stopper screw to fine-tune the retract end position during initial commissioning, eliminating the need for external shims.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-20 the Right Cylinder?

An adjustable stroke is highly beneficial over a fixed SAI cylinder when you need variable end-stops for product changeovers or precise machine setup without adding external physical stops.

Because this model features a 175 mm stroke, the 12 mm rod and M10x1.25 thread handle moderate side loads, though long unsupported travels still require an external guide. It is dimensionally interchangeable with ISO 15552 cylinders and supports a mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that without a magnet, this unit does not support CMSE or DMSE sensors.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-20 FAQ

The nominal stroke is 175 mm, but the rear adjuster allows you to shorten the effective travel by up to 20 mm, providing a usable stroke window of 155 to 175 mm.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32AX175-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.