
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX175-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X175-30-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 145-175 mm usable travel window, letting you trim up to 30 mm from the 175 mm nominal stroke during commissioning.
This variant features a SUS420J2 stainless steel rod for improved corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides. Equipped with a magnet, it supports AirTAC CMSE reed and DMSE electronic solid-state switches for precise end-of-stroke detection.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 145-175 mm end position during initial machine commissioning without swapping cylinders or adding bulky external stopper blocks.
Quickly adjust the stroke end-stop by up to 30 mm to accommodate slight variations in incoming product sizes on a packaging line.
If your setup needs higher thrust, stepping up to the 40 mm bore yields 628 N. Choose the SAIJ adjustable-stroke design over a fixed SAI cylinder when you need a variable end-stop for product changeovers. Note that the rear adjuster acts only as a travel stop; it does not hold the load without live air. For load-holding without pressure, consider an SAIL or BSAI cylinder.
For this 175 mm stroke, which is below the 300 mm side-load threshold, the 12 mm rod and M10x1.25 thread handle standard guiding tasks adequately. To replace an ISO 15552 cylinder, match the 32 mm bore, 175 mm stroke, 30 mm adjustment, PT G1/8 port, and the -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
An external adjusting screw at the rear acts as a stopper, allowing you to shorten the effective stroke by up to 30 mm. This creates a usable travel window of 145-175 mm. The adjuster only sets the travel end and does not lock the load without live air pressure.
The maximum thrust is 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.