verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-75

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX175-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke175 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$85.11 $92.61Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-75

The AirTAC SAIJ32X175-75 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 175 mm nominal stroke by up to 75 mm. This yields a highly flexible 100-175 mm usable travel window, perfect for fine-tuning end positions during commissioning without swapping out hardware.

This variant utilizes a SUS420J2 stainless steel rod (material code A) for improved corrosion resistance compared to standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches. Remember that the rear adjuster functions strictly as a travel stop to set deceleration, not as a lock; the cylinder cannot hold a load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-75 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32AX175-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke175 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-75

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×175Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-75 Is Used

tune

Machine Changeover

Dial in the 100-175 mm travel window instantly on the rear stopper when switching between product sizes on a packaging line.

precision_manufacturing

End-Position Tuning

Fine-tune the final retract position during commissioning without machining external stop blocks or changing the cylinder.

conveyor_belt

Variable Diverter Stroke

Adjust the actuator reach on the fly to accommodate different package widths moving down a conveyor.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-75 the Right Cylinder?

Conversely, if you require fixed travel without the need for commissioning adjustments, a standard SAI cylinder would suffice.

When replacing an ISO 15552 cylinder, match the 32 mm bore, 175 mm stroke, 75 mm adjustment range, PT port thread, and your desired mounting set (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that SAIJ omits the FB, CA, CB, and CR mounts. Because the 175 mm stroke is relatively long for this small bore, the 12 mm rod should be paired with an external guide to prevent excessive side-loading and premature seal wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-75 FAQ

The rear adjuster acts as a mechanical stop that lets you shorten the 175 mm nominal stroke by up to 75 mm, providing a usable travel window of 100 to 175 mm. It sets the end position and works with the air cushion for deceleration, but it does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32AX175-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.