
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX185-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 185mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X185-10 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 12mm piston rod and a usable travel window of 175-185mm, allowing you to dial back the nominal 185mm stroke by up to 10mm.
The barrel is extruded aluminum with sensor grooves on both sides. The piston rod utilizes SUS420J2 stainless steel for improved corrosion resistance, and the fluid port features a PT tapered thread. You can fine-tune end positions at commissioning without bolting on external stops or swapping the cylinder.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX185-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract end position by up to 10mm during product size changes without replacing the cylinder or adding external stopper blocks.
Dial in the exact 175-185mm travel window during commissioning to accommodate mechanical tolerances and achieve precise sensor triggering.
Adjust the stroke on packaging lines to handle slightly different carton lengths using the rear screw stopper mechanism.
Choose this 32mm bore adjustable-stroke cylinder when your setup requires precise end-position tuning during machine changeovers. The rear adjuster acts purely as a travel stop to set deceleration, not a lock; a plain SAIJ does not hold loads without live air, so for fail-safe load holding, consider the SAIL or BSAI series. To match this ISO 15552 interchangeable cylinder, specify the 32mm bore, 185mm stroke, 10mm adjustment, PT G1/8 port, and no magnet.
Quick checklist
At 0.9 MPa, the push force increases to 724N.
The rear adjuster screw lets you shorten the effective travel from the 185mm nominal stroke down to 175mm, providing a 175-185mm usable window for fine-tuning the retract end position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.