verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX185-100

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX185-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 185mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke185 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$88.16 $95.66Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX185-100

The AirTAC SAIJ32X185-100 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 185 mm stroke that can be dialed back by up to 100 mm, yielding a highly flexible 85-185 mm usable travel window.

This variant features a SUS420J2 stainless steel rod (code A) for improved corrosion resistance compared to standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. Fluid supply must be filtered to 40 um, and the PT tapered port thread ensures a robust pneumatic connection.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX185-100 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32AX185-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke185 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX185-100

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×185Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX185-100 Is Used

tune

Machine Changeover

Dial in the 85-185 mm travel window during product size changes without physically swapping cylinders or adding external stopper blocks.

precision_manufacturing

End-Position Trimming

Fine-tune the retract end position at commissioning to compensate for mechanical tolerance stack-up in fixture alignment.

conveyor_belt

Adjustable Diverter

Adjust the stroke length on a sorting line diverter to accommodate varying package dimensions on the fly.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX185-100 the Right Cylinder?

Choose this 32 mm bore when you need variable end-stops for frequent product changeovers rather than a fixed-stroke SAI cylinder. The rear adjuster acts purely as a mechanical stop to decelerate travel; it does not hold the load without live air. For secure load-holding, consider the SAIL or BSAI series.

When replacing an ISO 15552 cylinder, match the 32 mm bore, 185 mm nominal stroke, 100 mm adjustment range, PT port thread, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 12 mm rod and M10x1.25 thread carry limited side-load capacity, always use an external guide for unsupported loads.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX185-100 FAQ

At the maximum 1.0 MPa pressure, it delivers 82 kgf.

The rear adjusting screw acts as an external stopper, allowing you to shorten the effective stroke from the nominal 185 mm down to 85 mm. This provides a 100 mm tuning window for precise end-position setup without replacing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX185-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32AX185-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.