Airtac Adjustable Cylinder SAIJ32 SAIJ32AX220-100S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX220-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 220mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke220 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX220-100S
The AirTAC SAIJ32X220-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 120 to 220 mm. Built for precision commissioning, it allows you to dial in the exact retract position without swapping out hardware.
This variant features a SUS420J2 stainless steel rod for enhanced corrosion resistance and includes a magnet for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel incorporates sensor grooves on both sides for flexible switch placement. It uses a PT tapered G1/8 port and offers adjustable air cushions at both ends to manage end-of-stroke impacts.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX220-100S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX220-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX220-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX220-100S Is Used
Machine Changeover
Dial in the retract position up to 100 mm during product size transitions without physically swapping the cylinder or adding external mechanical stops.
Sensor-Driven Sorting
The integrated magnet pairs with DMSE electronic sensors to trigger downstream actions accurately within the 120 to 220 mm adjustable travel window.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX220-100S the Right Cylinder?
Choose this 32 mm bore when you need precise variable end-stops for product changeovers rather than a fixed-stroke SAI cylinder. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true fail-safe holding, consider an SAIL or BSAI cylinder.
To replace an ISO 15552 cylinder, match the 32 mm bore, 220 mm stroke, 100 mm adjustment range, PT G1/8 port, and the -S magnet requirement. Because the total stroke is 220 mm, ensure adequate guiding to prevent excessive side-loading on the 12 mm rod. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX220-100S FAQ
The rear adjuster screw allows you to shorten the effective stroke by up to 100 mm. This creates a usable travel window between 120 mm and 220 mm, letting you fine-tune the retract position at commissioning without changing the cylinder.
At 0.9 MPa, the push force increases to 724 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX220-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.