Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke230 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10
The AirTAC SAIJ32X230-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window between 220 and 230 mm. Equipped with a SUS420J2 stainless steel rod (option A) and PT tapered ports, it delivers 402 N of push thrust at 0.5 MPa. This compact 32 mm bore size is ideal for lighter-duty applications requiring exact end-position calibration.
Because the adjuster acts purely as a mechanical stop on the retract end, it does not hold the load without live air pressure. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to easily mount CMSE reed or DMSE electronic sensors if position feedback is needed later. This model uses the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), intentionally omitting FB, CA, CB, and CR brackets.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10 Is Used
Machine Setup Calibration
Dial in the exact 220 to 230 mm retract position during initial commissioning to perfect part ejection without machining custom spacers.
Product Changeover
Quickly adjust the end-stop by up to 10 mm on a packaging line when running slightly different carton lengths, minimizing downtime.
Fine Positioning Tasks
Use the variable end-stop to precisely set the lower travel limit for light-duty pressing or locating tasks requiring 402 N of force.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10 the Right Cylinder?
Choose this 32 mm bore when you need 402 N of push force at 0.5 MPa and a highly precise variable end-stop; if your application requires greater thrust, stepping up to the 40 mm bore yields 628 N. The 10 mm adjustable range is perfect for dialing in final positioning during commissioning without swapping out the entire cylinder or adding external shims. For any load-holding requirements without continuous air pressure, this cylinder's adjuster will not suffice, so you should look toward the SAIL or BSAI locking series instead. At a 230 mm stroke, the 12 mm rod and M10x1.25 thread provide good rigidity, though external guidance is recommended if handling significant lateral loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10 FAQ
The nominal stroke is 230 mm, but the rear adjuster allows you to shorten the effective travel by up to 10 mm, creating a usable stroke window of 220 to 230 mm for fine-tuning the end position.
At 0.5 MPa operating pressure, the 32 mm bore provides 402 N of push thrust and 345 N of pull thrust. At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.