Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-20S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX145-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 145mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke145 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-20S
The AirTAC SAIJ32X145-20-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 125 to 145 mm, allowing you to dial back the nominal stroke by up to 20 mm during commissioning without adding external stops.
This variant integrates a SUS304 stainless steel rod for superior corrosion resistance and includes a magnet for CMSE reed and DMSE electronic sensors. It uses a G1/8 port and omits the FB, CA, CB, and CR mounting interfaces, supporting only the Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-20S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-20S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-20S Is Used
Machine Changeover
Fine-tune the retract distance by up to 20 mm during product size transitions without swapping out the cylinder or reengineering the fixture.
End-Stop Calibration
Dial in the exact 125 to 145 mm travel window at commissioning to perfect positioning cues for delicate assembly tasks.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-20S the Right Cylinder?
Choose this 32 mm bore cylinder when an application requires precise end-position tuning on the fly, such as adapting to slightly varying product sizes on a conveyor. Conversely, you would step down to a 25 mm bore for lighter loads. Because the stroke is 145 mm, external side-load guides are recommended to prevent rod binding.
The rear adjuster screw acts strictly as a travel stop to fine-tune the retract end position; it does not hold the load without live air pressure. For true fail-safe load holding, select an AirTAC SAIL (pneumatic lock) or BSAI (clamp-lock) cylinder. To match this ISO 15552 interchangeable replacement, specify: 32x145 stroke, 20 mm adjustment, PT tapered port thread, SUS304 rod, and the -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-20S FAQ
At the maximum pressure of 1.0 MPa, it delivers up to 82 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective travel from the 145 mm nominal stroke down to as little as 125 mm. It only sets the end position and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.