Airtac Adjustable Cylinder SAIJ32 SAIJ32BX60-10S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX60-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX60-10S
The AirTAC SAIJ32X60-10-S is a double-acting, single-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 50 to 60 mm usable travel window, letting you dial in the exact end position during commissioning without adding external stops. Equipped with a SUS304 stainless steel rod and a magnetic piston for CMSE or DMSE sensors, it yields 402N of push force at 0.5 MPa.
This 32 mm bore variant uses G1/8 PT ports and relies on a 12 mm rod with an M10x1.25 thread. The extruded aluminum barrel includes sensor grooves on both sides, and the rear adjuster functions strictly as a travel stop, not a load-holding lock.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX60-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX60-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX60-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX60-10S Is Used
Machine Setup Tuning
Fine-tune the 50 to 60 mm travel window during initial commissioning to perfectly align tooling without swapping cylinders.
Variable End Stops
Adjust the rear stopper by up to 10 mm to accommodate minor changes in product size on a packaging line.
Light Assembly Clamping
Provides 402N of push force at 0.5 MPa for securing small components, with the stainless rod resisting corrosion.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX60-10S the Right Cylinder?
Choose this 32 mm bore when your application requires 402N of push force at 0.5 MPa, stepping down from a 40 mm bore that provides 628N. An adjustable stroke is ideal for machine setups requiring variable end-stops or product changeovers, whereas a fixed SAI cylinder suits fixed travel limits. For holding a load without live air, use an external rod lock or pilot-operated check valve, as the rear adjuster only sets the travel end.
This SAIJ32X60-10-S is dimensionally interchangeable per ISO 15552 and includes a -S magnet for position sensing. It uses PT port threads, a 12 mm SUS304 rod, and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX60-10S FAQ
At 0.5 MPa operating pressure, this 32 mm bore cylinder provides 402N of push force and 345N of pull force. It can reach a maximum of 82 kgf at 1.0 MPa.
The rear adjuster screw allows you to shorten the nominal 60 mm stroke by up to 10 mm, creating a 50 to 60 mm usable travel window. The adjuster acts as a travel stop for end-position tuning and does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.