Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke700 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10
The AirTAC SAIJ32X700-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 690-700mm usable travel window, letting you dial back the nominal 700mm stroke by up to 10mm during commissioning. It delivers 402N of push force and 345N of pull force at 0.5MPa, operating at speeds of 30-800mm/s.
This variant uses a SUS304 stainless steel rod for corrosion resistance and a PT tapered G1/8 port. The extruded aluminum barrel includes sensor grooves on both sides. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10 Is Used
Machine Changeover
Dial in the 690-700mm end position precisely when switching product sizes on a packaging line, avoiding mechanical rebuilds.
Assembly Calibration
Fine-tune the retract stop during commissioning to perfect a pressing or feeding operation without adding external stops.
Variable End Stops
Adjust the travel window on the fly for automated material handling equipment that processes varying package lengths.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10 the Right Cylinder?
Choose this 32mm bore when you need precise end-position tuning without adding external stops or swapping cylinders. If your process requires higher force, step up to the 40mm bore which yields 628N push force at 0.5MPa. The rear adjuster acts as a travel stop, not a lock; it will not hold a load without live air pressure. For load-holding safety, consider the SAIL or BSAI series.
When replacing an ISO 15552 cylinder, match the 32mm bore, 700mm stroke, 10mm adjustment, PT G1/8 port, and the specified mounting bracket. Because the stroke is 700mm, the M10x1.25 rod is highly susceptible to side-loading; always guide the load externally to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10 FAQ
It features a rear adjusting screw that allows you to shorten the effective stroke by up to 10mm. This creates a 690-700mm usable travel window for fine-tuning the end position at commissioning without replacing the cylinder.
At 0.5MPa operating pressure, it provides 402N of push force and 345N of pull force. The maximum operating pressure is 1.0MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.