Airtac Adjustable Cylinder SAIJ32 SAIJ32BX750-50S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX750-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 750mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke750 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX750-50S
The AirTAC SAIJ32X750-50-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 700-750mm usable travel window by allowing you to dial back the nominal 750mm stroke by up to 50mm.
Equipped with a SUS304 stainless steel rod, it handles corrosive environments better than standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic solid-state switches. The rear adjuster acts purely as a travel stop for end-position tuning and does not hold the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX750-50S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX750-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX750-50S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX750-50S Is Used
Changeover Calibration
Dial in the exact end-stop from 700 to 750mm during product size changeovers without adding external physical stops to the machine frame.
Variable Positioning
Fine-tune the retract distance on a packaging conveyor to accommodate different package widths on the fly during line setup.
Sensor Setup
Leverage the dual-side sensor grooves and built-in magnet to easily set DMSE electronic switch trip points alongside the mechanical stroke limit.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX750-50S the Right Cylinder?
Choose this 32mm bore adjustable cylinder when your machine setup requires fine end-position tuning during commissioning or product changeover without swapping out the entire actuator. For load-holding without continuous air pressure, this standard SAIJ is insufficient; consider the SAIL air-released lock or BSAI clamp-lock series instead.
This SAIJ32X750-50-S configuration features a PT tapered port, a 12mm rod with an M10x1.25 thread, and a built-in magnet for position sensing. Because the stroke is 750mm, the extended rod is highly susceptible to side-loading; an external guide is strongly recommended to prevent premature seal wear. It supports the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and is dimensionally interchangeable per ISO 15552.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX750-50S FAQ
The rear adjuster is a mechanical stop that lets you shorten the effective travel from 750mm down to 700mm. It is used for fine-tuning end positions at commissioning but does not lock or hold the load without live air pressure.
The maximum operating pressure is 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX750-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.