Airtac Adjustable Cylinder SAIJ32 SAIJ32BX800-100S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX800-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 800mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke800 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX800-100S
The AirTAC SAIJ32X800-100-S is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster, equipped with a SUS304 stainless steel rod and a magnet for CMSE or DMSE sensors. The integrated rear stopper provides a usable travel window of 700-800mm, letting you dial back the 800mm nominal stroke by up to 100mm.
This adjustable design eliminates the need to swap cylinders or bolt on external stops during commissioning. The PT tapered port ensures a tight seal, while the extruded aluminum barrel includes sensor grooves on both sides. Remember the rear adjuster acts only as a travel stop and relies on live air; it does not hold the load mechanically without pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX800-100S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX800-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX800-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX800-100S Is Used
Machine Setup Tuning
Dial in the exact end-of-stroke position during commissioning without swapping out the physical cylinder or adding external stopper blocks.
Product Size Changeover
Quickly adjust the 700-800mm travel window to accommodate varying package lengths on a packaging line during product transitions.
Long-Travel Positioning
Fine-tune the retract end-position on a long-stroke assembly station to ensure precise alignment before the final clamping operation.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX800-100S the Right Cylinder?
The 100mm adjustment window is perfect for product changeovers on a line, giving you a variable end-stop without replacing the actuator. Because the stroke is 800mm, an external guide is recommended to manage side-load on the 12mm rod.
For ISO 15552 replacement matching, specify a 32mm bore, 800mm stroke, 100mm adjustment, PT port thread, and the -S magnet. This cylinder uses the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. If your application requires true load-holding without live air, this cylinder is not a lock; consider an external rod lock or the AirTAC SAIL series instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX800-100S FAQ
The rear adjuster acts as a mechanical stop that lets you shorten the 800mm nominal stroke by up to 100mm, creating a usable travel window of 700-800mm. It requires live air to function and does not mechanically lock or hold the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX800-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.