Airtac Adjustable Cylinder SAIJ32 SAIJ32BX800-75S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX800-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 800mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke800 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX800-75S
The AirTAC SAIJ32X800-75-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel within a 725-800 mm window. The integrated magnet supports CMSE reed and DMSE electronic sensors for precise position tracking.
This adjustable-stroke design eliminates the need to swap cylinders or add external stops during machine changeovers. The rear adjuster acts strictly as a travel stop to set the end position, not a lock. For load-holding without live air pressure, an external rod lock or related SAIL series is required.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX800-75S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX800-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX800-75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX800-75S Is Used
Machine Changeover
Quickly dial in the 725-800 mm travel window during product size changes without physically swapping out the entire actuator.
End-Position Trimming
Use the rear stopper to fine-tune the exact retract position during machine commissioning, avoiding the need for external mechanical stops.
Long-Stroke Sorting
Handles long-travel sorting tasks on a line, where the 800 mm stroke and 75 mm adjustment flexibility accommodate varying package sizes.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX800-75S the Right Cylinder?
The 75 mm adjustment range is ideal for dialing in exact end positions during commissioning without replacing the cylinder.
Because the 800 mm stroke creates an unsupported length on a 12 mm rod, an external guide is recommended to prevent excessive side-loading. This SAIJ configuration includes a SUS304 stainless steel rod, PT tapered ports, and a -S magnet. It supports the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX800-75S FAQ
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjuster screw allows you to shorten the nominal 800 mm stroke by up to 75 mm, creating a usable travel window of 725-800 mm. The adjuster acts as a mechanical stop to set the end position and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX800-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.