
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X105-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 105mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X105-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end position. With a nominal 105 mm stroke and a 100 mm adjustment range, it provides a wide usable travel window from 5 to 105 mm. This flexibility is ideal for machine setups requiring variable end stops without swapping hardware.
The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this specific configuration omits the magnet. It uses a 12 mm carbon steel rod with an M10x1.25 thread and a PT tapered G1/8 port. The rear adjuster acts purely as a travel stop for deceleration and positioning; it does not lock or hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X105-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop from 5 to 105 mm during product size transitions without replacing the cylinder or adding external stops.
Fine-tune the retract travel at commissioning to achieve precise positioning, using the rear adjuster to set the exact 5-105 mm travel window.
Set custom stroke limits on automated test fixtures where the effective travel distance needs frequent adjustment across a 100 mm range.
Choose this 32 mm bore adjustable cylinder when your application requires precise end-position tuning during commissioning or product changeover, rather than relying on a fixed-stroke SAI cylinder. To achieve a true ISO 15552 replacement match, verify the 105 mm stroke, 100 mm adjustment, PT G1/8 port, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the stroke is relatively short, side-load concerns are minimal, but always ensure external guides are used for heavy lateral loads.
Quick checklist
The 100 mm adjustment range on a 105 mm nominal stroke creates a usable travel window of 5 to 105 mm.
The rear adjuster acts as a mechanical stop that limits the retract travel, allowing you to trim the stroke by up to 100 mm. It is not a locking device and cannot hold a load without continuous air pressure; for load-holding, use the SAIL or BSAI series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.