Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke110 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10
The AirTAC SAIJ32X110-10 is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 110 mm stroke that can be fine-tuned down by up to 10 mm, giving you a precise 100-110 mm usable travel window. In the 32 mm bore class, it delivers 402 N of push force and 345 N of pull force at 0.5 MPa.
This adjustable model uses a standard carbon steel piston rod with an M10x1.25 thread and a PT G1/8 port. The extruded aluminum barrel features sensor grooves on both sides, allowing you to add CMSE reed or DMSE electronic switches if needed. It retains the standard variable air cushions at both ends to decelerate the load smoothly.
Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10 Is Used
End-Stop Tuning
Dial in the exact 100-110 mm retract position during machine commissioning to perfect part seating without swapping cylinders.
Product Changeover
Quickly adjust the rear stopper by up to 10 mm to accommodate slight variations in new product sizes on a packaging line.
Fixture Positioning
Set precise clamping depths in small-bore pneumatic fixtures where a fixed 110 mm stroke might overtravel or undertravel.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10 the Right Cylinder?
Choose this 32 mm bore when you need 402 N push force at 0.5 MPa; step up to the 40 mm bore if your application requires 628 N. The SAIJ32X110-10 is selected over a fixed SAI cylinder when you need to dial in the exact end-of-stroke position during commissioning or product changeover without adding external stops. The rear adjuster acts purely as a travel stop and does not hold the load without live air—use an external rod lock or SAIL cylinder for pneumatic load-holding.
As a dimensionally interchangeable ISO 15552 profile cylinder, it matches standard mounting footprints. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). With a 110 mm stroke, the 12 mm rod handles standard loads well, but always verify side-load limits and use an external guide for any unsupported masses.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10 FAQ
At 0.5 MPa operating pressure, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. It can reach a maximum push force of 724 N at 0.9 MPa.
The rear adjuster screw allows you to shorten the effective stroke by up to 10 mm, creating a 100-110 mm travel window. It acts as a mechanical stop to fine-tune the end position and does not lock the load when air is removed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.