Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-100
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke110 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-100
The AirTAC SAIJ32X110-100 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a usable travel window of 10-110 mm, allowing you to dial back the 110 mm nominal stroke by up to 100 mm. This bore size delivers 402 N of push force and 345 N of pull force at 0.5 MPa, making it suitable for lighter-duty operations.
The extruded aluminum barrel features sensor grooves on both sides for CMSE or DMSE switches. The standard carbon steel rod has an M10x1.25 thread and a 12 mm diameter, which handles basic side loads well, though external guides are recommended for unsupported travel. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-100 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-100 Is Used
Machine Setup
Dial in the exact retract distance during initial commissioning to perfect part alignment without machining new spacers.
Product Changeover
Quickly adapt the stroke window from 10 to 110 mm on packaging lines handling varying container sizes.
End-Position Tuning
Use the rear screw to fine-tune the travel limit on lightweight assembly pick-and-place tools.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-100 the Right Cylinder?
Choose this adjustable-stroke cylinder when you need to fine-tune end positions during commissioning or product changeovers without swapping out the entire unit or adding external stops. If your application requires less force, stepping down is not an option from this size, but stepping up to a 40 mm bore yields 628 N of push force at 0.5 MPa.
Remember that the rear adjuster functions strictly as a travel stop, not a lock; it will not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series. When matching ISO 15552 dimensions, specify the PT port, 110 mm stroke, 100 mm adjustment, and standard carbon steel rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-100 FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. It can reach a maximum push force of 724 N at 0.9 MPa.
The rear adjuster acts as a mechanical stop that lets you shorten the 110 mm nominal stroke by up to 100 mm, providing an effective travel window of 10 to 110 mm. It requires live air to maintain position and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.