
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X110-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X110-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a carbon steel piston rod and a PT tapered port thread. Because this model carries a 100 mm adjustment code on a 110 mm nominal stroke, you can dial the effective travel back to anywhere in a 10 to 110 mm window. This extreme adjustability allows you to fine-tune the retract end-position at commissioning without swapping the cylinder or adding external stops.
The extruded aluminum barrel includes sensor grooves on both sides, and because this is the -S variant, it contains a magnet for position detection. It works seamlessly with AirTAC CMSE reed switches and DMSE electronic solid-state sensors. The rear adjuster acts purely as a travel stop, meaning it does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 10 to 110 mm during machine commissioning to accommodate different product lengths without changing hardware.
Quickly readjust the stroke window on packaging lines when switching between different package sizes, minimizing downtime and mechanical modifications.
Leverage the built-in magnet with DMSE electronic sensors to confirm the adjusted end-position across the 10-110 mm travel range.
The SAIJ32X110-100-S is selected over a fixed-stroke SAI when a machine requires extreme variability in its retract distance, offering a massive 10 to 110 mm usable travel window for product-size changeovers. For load-holding without continuous air pressure, this cylinder is insufficient; you should look to the SAIL (air-released lock) or BSAI (clamp-lock) series instead.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 110 mm nominal stroke, 100 mm adjustment range, PT port thread, and the -S magnet. The 12 mm rod and M10x1.25 rod thread handle moderate side loads, but because the stroke is 110 mm, ensure your mounting configuration—whether Basic, FA, LB, TC, FTC, TCM1, or TCM2—provides adequate support to prevent rod bending.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it achieves 82 kgf.
The rear adjuster acts as a mechanical stop that lets you trim the effective travel back by up to 100 mm. This creates a usable stroke window of 10 to 110 mm, though it only sets the end position and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.