Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke110 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10S
The AirTAC SAIJ32X110-10-S is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 110 mm nominal stroke that can be dialed back by up to 10 mm, giving you a precise 100-110 mm usable travel window for exact end-position tuning at commissioning. Delivering 402 N of push force at 0.5 MPa, it fits compact automation tasks perfectly.
This unit features a standard carbon steel piston rod and a PT tapered port thread. The extruded aluminum barrel includes sensor grooves on both sides, and because this is the -S variant, it contains a magnet ready for CMSE reed and DMSE electronic solid-state switches. The rear adjuster acts purely as a travel stop for deceleration, so it will not hold a load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10S Is Used
End-Position Tuning
Dial in the exact 100-110 mm travel window during machine commissioning to compensate for mechanical tolerances without adding external stops.
Product Changeover
Quickly adjust the retract end-position by up to 10 mm on the fly when running a new batch of varying-sized components on the same line.
Compact Assembly
Leverage the 402 N push force and ISO 15552 footprint to execute precise, short-stroke clamping or positioning in tight machinery layouts.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10S the Right Cylinder?
Choose this 32 mm bore when your application requires 402 N of push force at 0.5 MPa. If your setup needs less force, stepping down is not an option in the SAIJ series, but if you require significantly more thrust, the 40 mm bore offers 628 N. The adjustable stroke is selected over a fixed SAI cylinder when you need variable end-stops to accommodate product changeovers without swapping hardware.
For ISO 15552 replacement matching, verify the 32 mm bore, 110 mm stroke, 10 mm adjustment range, PT port thread, and the -S magnet. This cylinder uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Since the 12 mm rod and M10x1.25 thread handle moderate side loads, ensure external guides are used if heavy lateral forces are present.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10S FAQ
A rear external adjusting screw acts as a mechanical stop, allowing you to shorten the effective stroke by up to 10 mm. This creates a 100-110 mm usable travel window for fine-tuning the retract end-position without changing the cylinder itself.
At 0.5 MPa operating pressure, the 32 mm bore provides 402 N of push force and 345 N of pull force. It can deliver up to 724 N of push force at 0.9 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.