verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-20S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X110-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke110 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$68.15 $75.65Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-20S

The AirTAC SAIJ32X110-20-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 90-110 mm from its 110 mm nominal stroke. This magnetic version includes a piston magnet for position sensing via AirTAC CMSE reed or DMSE electronic switches fitted into the dual-side sensor grooves.

Instead of adding external stops during commissioning, the rear adjusting screw allows fine end-position tuning without swapping the cylinder. It uses a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. The rear adjuster acts purely as a travel stop to set deceleration, not as a load-holding lock.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-20S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X110-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke110 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-20S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×110Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-20S Is Used

tune

End-Position Tuning

Dial in the exact retract distance within the 90-110 mm window during machine setup without machining new hard stops.

view_module

Product Changeover

Quickly adapt the cylinder travel on a packaging line when switching to a different sized carton or fixture.

settings_input_component

Sensor Equipped Sorting

Leverage the -S magnet and dual sensor grooves to confirm end-of-stroke signals while adjusting the travel limit.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-20S the Right Cylinder?

The adjustable stroke is ideal for product-size changeovers where the exact end position needs on-the-fly tuning. For load-holding without live air pressure, select a SAIL or BSAI cylinder instead, as the SAIJ adjuster is only a stop.

When replacing an ISO 15552 cylinder, match the 32 mm bore, 110 mm stroke, 20 mm adjustment range, PT tapered port threads, and the -S magnet option. Since the 110 mm stroke is relatively short, side-load risks are minimal, but always ensure the M10x1.25 rod thread is properly aligned to prevent binding.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-20S FAQ

The rear adjusting screw acts as an external stopper that lets you shorten the effective stroke by up to 20 mm. This creates a usable travel window of 90 to 110 mm, allowing fine-tuning of the end position at commissioning without replacing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X110-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.