Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-40
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke110 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-40
The AirTAC SAIJ32X110-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 40 mm. This creates a usable stroke window of 70 to 110 mm, letting you dial in the exact end position without swapping out the unit. It features a carbon steel piston rod and generates 402 N of push force at 0.5 MPa.
Because the SAIJ uses an extruded aluminum barrel with sensor grooves on both sides, it is dimensionally interchangeable per ISO 15552 standards. The rear adjuster acts purely as a mechanical stop to set the travel limit and relies on the integrated air cushions for end-of-stroke deceleration; it does not hold the load without live air pressure. For applications requiring position holding without compressed air, consider the SAIL or BSAI series.
Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-40 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-40
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-40 Is Used
Product Changeover
Quickly adapt the cylinder's end position for different product sizes on a packaging line by dialing the rear adjuster up to 40 mm.
Machine Setup
Fine-tune the 70-110 mm travel window during commissioning to perfect the seating force without adding external stopper blocks.
End-Position Tuning
Trim the effective stroke to perfectly meet a delicate workpiece, preventing overtravel and ensuring consistent assembly quality.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-40 the Right Cylinder?
Choose this 32 mm bore when you need 402 N of push force at 0.5 MPa, stepping down from a 40 mm bore (628 N) for a lighter, more compact assembly. An adjustable stroke is ideal for machine setup and product changeover, allowing you to fine-tune the end stop on the fly rather than relying on a fixed-stroke SAI cylinder. The PT tapered port thread ensures a tight, reliable pneumatic connection.
When ordering, verify your requirements: 32 mm bore, 110 mm nominal stroke, 40 mm adjustment range, PT G1/8 port, and standard carbon steel rod. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since the nominal stroke is 110 mm, side-load risks are minimal, but always ensure guided loads for optimal seal life.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-40 FAQ
The rear adjuster acts as an external mechanical stop that shortens the effective stroke by up to 40 mm. This gives you a usable travel window of 70 to 110 mm, allowing precise end-position tuning at commissioning without changing the cylinder.
At 0.5 MPa operating pressure, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. It can generate up to 724 N of push force at 0.9 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.