
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X110-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X110-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability eliminates the need to swap cylinders or add external stops when fine-tuning end positions.
This variant includes a magnet for position sensing with CMSE reed or DMSE electronic switches and uses a standard carbon steel rod with PT tapered ports. The extruded aluminum barrel provides sensor grooves on both sides. Remember that the rear adjuster functions strictly as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 70-110 mm travel window during product size changes without swapping the physical cylinder or adding external stopper blocks.
Fine-tune the retract end position at commissioning to precisely seat parts, using the rear screw to absorb minor mechanical variations.
Leverage the -S magnet and dual barrel grooves to mount CMSE or DMSE switches for exact position feedback across the adjusted travel range.
An adjustable stroke is preferred over a fixed SAI cylinder here because the 40 mm trim window allows rapid product-size changeovers without mechanical rebuilds. To replace an ISO 15552 cylinder, match the 32 mm bore, 110 mm stroke, PT port threads, and the -S magnet requirement. For strokes of 300 mm or more, always factor in an external guide to support side loading.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the 110 mm nominal stroke by up to 40 mm, providing a usable travel window of 70 to 110 mm. It only sets the travel end and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.