
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X110-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X110-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 110mm stroke that can be dialed back by up to 50mm, creating a precise 60-110mm usable travel window for product changeovers.
This extruded aluminum profile barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. The rear adjustment screw acts purely as a travel stop to fine-tune end positions without adding external stops, while the standard carbon steel rod and M10x1.25 thread provide a robust interface for standard loads.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 60 to 110mm travel distance during machine commissioning to accommodate varying product widths without physically replacing the actuator.
Rapidly adjust the retract end-position by up to 50mm on packaging lines to handle different package lengths efficiently.
If your process demands higher thrust, stepping up to the 40mm bore yields 628N at the same pressure. The 50mm adjustment range allows operators to shorten the stroke dynamically during setup rather than swapping to a fixed-stroke SAI cylinder. Remember that the rear adjuster is a stop, not a lock; the SAIJ cannot hold a load without live air, so for fail-safe holding, consider the SAIL or BSAI series. Since the stroke is 110mm, side-loading is minimal, but always ensure the load is guided for long unsupported travels.
Quick checklist
It features a rear adjusting screw that acts as an external stopper, allowing you to shorten the effective stroke from 110mm down to a minimum of 60mm. This provides a 60-110mm usable travel window for fine-tuning end positions without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.