verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-75S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X110-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke110 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$68.15 $75.65Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-75S

The AirTAC SAIJ32X110-75-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the nominal 110 mm travel back by up to 75 mm. This yields a highly flexible 35-110 mm usable stroke window, letting you dial in the exact end-position during commissioning without swapping the barrel or adding external stops.

Equipped with a standard carbon steel piston rod and PT tapered port threads, this unit includes a magnetic piston (-S) for position sensing. The extruded aluminum barrel integrates sensor grooves on both sides, accepting AirTAC CMSE reed switches or DMSE solid-state electronic sensors. The rear adjuster acts strictly as a travel stop for end-position tuning, not a load-holding lock, so live air pressure must be maintained to keep the load in place.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-75S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X110-75S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke110 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-75S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×110Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-75S Is Used

tune

Product Changeover

Rapidly reconfigure the 35-110 mm travel window during packaging format changes without disassembling the cylinder or adding external stopper blocks.

settings_input_component

Commissioning Calibration

Fine-tune the retract end-position during machine setup to perfect timing and avoid mechanical crashes before final lock-down.

precision_manufacturing

Variable End-Stops

Accommodate multiple part lengths on a single conveyor line by adjusting the stroke back by up to 75 mm on the fly.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-75S the Right Cylinder?

An adjustable stroke is selected over a fixed SAI cylinder when a machine handles frequent product-size changeovers, allowing rapid reconfiguration of the travel window from 35 to 110 mm without mechanical modifications. For strokes of 110 mm, side-load is minimal, but always guide the load if lateral forces are present.

To match this ISO 15552 replacement, specify: 32 mm bore, 110 mm nominal stroke, 75 mm adjustment range, PT port threads, and the -S magnet option. Remember that the rear adjuster screw and the variable air cushions only decelerate the travel end; they do not function as a brake. For true load-holding without live air pressure, consider the SAIL pneumatic lock or BSAI clamp-lock series instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-75S FAQ

The rear adjuster screw acts as a mechanical stop that lets you shorten the effective travel from the nominal 110 mm down to 35 mm, providing a 75 mm adjustment window. It sets the end-position but does not hold the load without live air pressure.

It can reach a maximum thrust of 82 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X110-75S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X110-75S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.