Airtac Adjustable Cylinder SAIJ32 SAIJ32X115-75S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32X115-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 115mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke115 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X115-75S
The AirTAC SAIJ32X115-75-S is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster, equipped with a magnet for position sensing. It provides 402N of push force and 345N of pull force at 0.5 MPa. By turning the external rear stopper screw, you can trim the effective travel back by up to 75 mm, creating a precise 40-115 mm usable stroke window for exact end-position tuning at commissioning.
This 32 mm bore version features a 12 mm carbon steel rod, an M10x1.25 rod thread, and PT tapered port threading. The extruded aluminum barrel includes sensor grooves on both sides, seamlessly accepting AirTAC CMSE reed and DMSE solid-state electronic switches. The rear adjuster acts purely as a travel stop to set deceleration and end limits; it does not lock or hold the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32X115-75S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X115-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X115-75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X115-75S Is Used
Product Changeover
Dial the stroke back from 115 mm to 40 mm instantly on the production line to accommodate varying package lengths without changing cylinders.
End-Stop Tuning
Fine-tune the final retract position during machine commissioning using the rear screw, ensuring precise alignment without adding external mechanical stops.
Sensor Integration
Utilize the dual sensor grooves with CMSE reed or DMSE electronic switches to confirm the adjusted end position in your control system.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X115-75S the Right Cylinder?
Choose this adjustable-stroke cylinder when your machine setup requires variable end stops or frequent product-size changeovers, eliminating the need to swap out a fixed-stroke SAI cylinder or bolt on external stops. If you need slightly higher force, stepping up to a 40 mm bore yields 628N of push force at 0.5 MPa, while dropping down is not an option in this ISO 15552 range.
For load-holding without continuous air pressure, note that this standard SAIJ adjuster is not a lock; you would need an external rod lock, a pilot-operated check valve, or an AirTAC SAIL (air-released lock) or BSAI (clamp-lock) cylinder. To replace an ISO 15552 cylinder, match the 32 mm bore, 115 mm stroke, 75 mm adjustment range, PT port thread, and the -S magnet requirement. Because the nominal stroke is 115 mm, side loads are minimal, but long unsupported strokes still require an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32X115-75S FAQ
At 0.5 MPa operating pressure, this 32 mm bore cylinder provides 402N of push force and 345N of pull force. At the maximum pressure of 1.0 MPa, it delivers up to 82 kgf.
The rear stopper screw allows you to shorten the 115 mm nominal stroke by up to 75 mm, giving an adjustable travel window of 40 to 115 mm. The adjuster sets the end position and deceleration, but it does not lock or hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X115-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.