
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X125-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 125mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X125-40 is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster. It provides a 125 mm nominal stroke that can be dialed back by up to 40 mm, creating a usable travel window of 85 to 125 mm. This allows you to fine-tune the retract end position at commissioning without swapping the cylinder or bolting on external stops.
The 12 mm carbon steel rod and M10x1.25 thread handle moderate side loads, though long unsupported strokes still require an external guide. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. The rear adjuster acts as a travel stop to set the end position, but it does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X125-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 85 to 125 mm during machine commissioning to perfect part ejection without machining new hard stops.
Quickly adapt the cylinder travel window on a packaging line when running different package sizes, reducing setup downtime between batches.
Precisely set the stroke length on a light-duty assembly press to accommodate varying component heights and ensure consistent clamping force.
If you need less force, stepping down is an option, but if your mechanism requires higher thrust, stepping up to a 40 mm bore yields 628 N. The adjustable stroke is ideal for machine setups requiring variable end stops or product changeovers. Since the stroke is 125 mm, standard mounting is sufficient without needing a separate external guide.
For an exact ISO 15552 replacement match, verify the 32 mm bore, 125 mm stroke, 40 mm adjustment range, PT tapered port thread, and standard carbon steel rod. This model does not include a magnet for sensors. If you need load-holding without live air pressure, consider the SAIL or BSAI series, as the SAIJ adjuster is only a stop, not a lock.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from the 125 mm nominal stroke down to 85 mm. It sets the end position but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.