
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X125-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 125mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X125-40-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 85 to 125 mm, allowing you to dial back the standard 125 mm stroke by up to 40 mm during commissioning.
Equipped with a magnet for position sensing, it supports AirTAC CMSE reed and DMSE electronic solid-state switches. The extruded aluminum barrel includes sensor grooves on both sides. Unlike fixed-stroke SAI models, this version lets you fine-tune the retract end position without swapping hardware or adding external stops. The adjuster acts purely as a travel stop, so it will not hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X125-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position from 85 to 125 mm during product size changes without replacing the cylinder or adding external stopper blocks.
Fine-tune the stroke during commissioning to absorb mechanical tolerances, ensuring precise end-of-travel positioning using the rear adjustment screw.
Choose this 32 mm bore when an application requires precise end-position tuning within an 85 to 125 mm window. The adjustable stroke is ideal for product changeovers on a line where exact retract positions vary slightly. For load-holding without continuous air pressure, consider the SAIL or BSAI series instead, as the SAIJ adjuster is not a locking mechanism.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 125 mm stroke, 40 mm adjustment range, PT tapered port, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Because the 125 mm stroke is under 300 mm, side-load concerns are minimal, but the 12 mm carbon steel rod and M10x1.25 thread still require standard alignment to prevent premature seal wear.
Quick checklist
It can deliver a maximum of 82 kgf at 1.0 MPa.
The rear adjuster screw allows you to shorten the effective travel from the nominal 125 mm down to 85 mm. This creates a 40 mm adjustable window for fine-tuning the retract end position at commissioning without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.