
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X125-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 125mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X125-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel. With a 125mm nominal stroke and a 50mm adjustment range, it provides a usable 75-125mm travel window for precise end-position tuning at commissioning.
This model features a 12mm carbon steel piston rod with an M10x1.25 thread, offering robust performance for its size. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic sensors. The rear adjuster acts purely as a mechanical stop to set the retract end position and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X125-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 75-125mm travel window during product size changes on a packaging line, using the rear stopper to set new end positions rapidly without adding external mechanical stops.
Fine-tune the retract position during commissioning of a small assembly fixture, ensuring the 12mm rod hits the exact datum point required for delicate component placement.
Choose this 32mm bore adjustable-stroke cylinder when your application requires variable end-stops or frequent product changeovers without swapping out the entire cylinder body. Conversely, if your force requirements are lower, you would step down.
The rear adjuster is ideal for fine-tuning the travel window during setup, but remember it is a stop, not a lock. For applications that require true load-holding without continuous air pressure, consider the SAIL (air-released lock) or BSAI (clamp-lock) variants. This SAIJ model uses PT tapered ports and supports the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
It operates at a speed range of 30-800mm/s.
The rear adjusting screw allows you to shorten the 125mm nominal stroke by up to 50mm, giving a usable travel window of 75-125mm. The adjuster functions as a mechanical stop to decelerate and set the end position, but it does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.