
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X125-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 125mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X125-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. With a 125mm nominal stroke and a 75mm adjustment range, it provides a wide usable travel window of 50 to 125mm. This allows you to dial in the exact end position during commissioning without adding external stops.
The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE or DMSE switches, though this specific SKU is configured without a magnet. It uses a standard carbon steel piston rod and PT tapered port threads. The rear adjuster acts purely as a mechanical stop to set the travel end; it does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X125-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 50-125mm window when switching a packaging line to a new carton size, eliminating the need to physically swap cylinders.
Fine-tune the final end position during machine commissioning to achieve precise registration without fabricating custom external mechanical stops.
Adjust the travel distance on the fly for testing different sensor trigger points or part ejection depths on a small assembly fixture.
The 75mm adjustment window is ideal for prototyping or machines processing varying part sizes. Unlike a fixed-stroke SAI cylinder, the SAIJ lets you fine-tune the retract position on the fly. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since the 125mm stroke is under 300mm, side-load stress on the 12mm rod is minimal, but an external guide is still recommended for heavy lateral loads. This model is dimensionally interchangeable per ISO 15552.
Quick checklist
The 125mm nominal stroke combined with the 75mm rear adjuster provides a usable travel window of 50 to 125mm.
No. The rear adjuster is a travel stop, not a locking device. The cylinder cannot hold a load without live air pressure. For fail-safe load holding, use an external rod lock or the AirTAC SAIL/BSAI series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.