verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-100

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X130-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke130 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$67.22 $74.72Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-100

The AirTAC SAIJ32X130-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 130 mm stroke that can be dialed back by up to 100 mm, yielding a highly versatile 30-130 mm usable travel window.

The rear adjuster acts purely as a mechanical stop to fine-tune the retract end position during commissioning or product changeovers, without requiring a cylinder swap. This extruded aluminum profile barrel includes sensor grooves on both sides for CMSE or DMSE switches, and the carbon steel rod with an M10x1.25 thread handles standard side loads effectively.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-100 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X130-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke130 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-100

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×130Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-100 Is Used

settings_input_component

Variable End-Stop Positioning

Dial in the exact retract distance between 30 and 130 mm on packaging feeders without physically swapping out the cylinder for a different stroke length.

tune

Machine Changeover

Quickly reconfigure the stroke window during product size transitions on a conveyor line, using the rear screw to adapt the end position on the fly.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-100 the Right Cylinder?

Select this 32 mm bore adjustable-stroke cylinder when your application demands variable end-stop positioning rather than a fixed travel length. The PT tapered port thread and standard carbon steel rod configuration make it a direct for typical pneumatic setups.

Because the 130 mm stroke is relatively short, external side-load guides are less critical than on longer strokes, though the rod diameter still dictates the acceptable lateral force. Remember that the rear adjuster is a travel stop, not a lock; if you need to hold a load securely without live air pressure, choose a SAIL pneumatic lock or BSAI clamp-lock cylinder instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-100 FAQ

The rear adjusting screw acts as a mechanical stopper that lets you shorten the effective stroke from the nominal 130 mm down to as little as 30 mm, providing a 100 mm adjustment window for fine-tuning the end position at commissioning.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X130-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.