
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X130-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X130-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. Because this SKU includes a -100 adjustment code, you can trim the nominal 130 mm stroke back by up to 100 mm, creating a highly versatile 30 to 130 mm usable travel window for precise positioning at commissioning.
This extruded aluminum profile cylinder includes a built-in magnet (-S) for use with AirTAC CMSE reed and DMSE electronic sensors, which seat cleanly into the sensor grooves on both sides of the barrel. It supports a standard speed range of 30-800 mm/s and uses a PT G1/8 port. The rear adjuster acts purely as a mechanical stop to set the retraction end-point and must not be confused with a lock, as it cannot hold a load without continuous live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retraction point between 30 and 130 mm during machine commissioning without swapping out the physical cylinder or adding external stopper blocks.
Quickly adapt a packaging line to accommodate different product lengths by turning the rear adjuster screw to shift the end-of-stroke position on the fly.
Leverage the integrated magnet with DMSE solid-state sensors to confirm the adjusted end position in automated assembly routines with high repeatability.
Select this 32 mm bore unit when an application demands extreme variability in the end-stop position, as the 100 mm adjustment range on a 130 mm stroke provides unmatched setup flexibility. For applications needing true load-holding without live air, consider an AirTAC SAIL or BSAI locking cylinder instead of relying on the standard adjuster.
To guarantee a seamless ISO 15552 replacement, verify the 130 mm stroke, 100 mm adjustment range, PT G1/8 port, and your preferred mounting bracket from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Since this configuration utilizes a 12 mm rod, it handles moderate side loads well, though any stroke at or above 300 mm would require external guiding to prevent rod deflection.
Quick checklist
If pressure is increased to 0.7 MPa, the push force rises to 563 N.
The rear adjusting screw acts as a mechanical stop that allows you to shorten the effective stroke by up to 100 mm. This creates a usable travel window of 30 to 130 mm, enabling fine-tuning of the end position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.